Centre Informatique Ahuntsic

La configuration du SPA2102 (SPA-2102) est difficile à cause de la variété des options.

Pour la mise à jour du firmware, il faut d'abord créer un compte sur le site de Cisco (ce qui est laborieux): https://tools.cisco.com

Voir chez Cisco:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414111

ou ici pour la version 5-2-5: rec-spa2102-5-2-5.zip

ou plus directement ici pour la version 5.2.5 du 5/21/2008 (2008-05-21)

(noter que Google-Chrome ne fonctionne pas sur le site de Cisco)

Configuration

Voir http://www.voip-info.org/wiki/view/Sipura+Documentation

Pour Asterisk:

The first thing I did was download and update the firmware from Linksys website. After that I log in and enable web admin access under Voice – System. Then login as admin, and switch to advanced settings.

Then under Voice – Line 1 (or Line 2).

Proxy and Registration

• Proxy = Trixbox server IP
• Outbound Proxy = Trixbox server IP
• Use outbound Proxy = no
• Register = yes

Subscriber Info

• Display Name = I use the name of the extension
• User ID = extension number
• Password = whatever it is in trixbox
• Use Auth ID = yes
• Auth ID = yes

Supplementary Service Subscriptions

• All settings = no

Audio Config (This is the one that makes or breaks you)

• Preferred Codec = g711u
• Use pref codec only = yes
• Silence supp enable = yes
• Silence Threshold = med
• All echo and fax settings = no
• DTMFTx method = InBand
• DTMF Tx mode = strict

This is what has worked for me. I found the DTMFTX = Inband to be a must. Other then that try the above settings and hopefully it gets you working. After that, you can start changing things as needed.  -- Gary V.

Plus spécifiquement pour le PBX du Centre Ahuntsic

SIP Settings

• SIP 100REL Enable: Yes
• SIP Remote-Party-ID: No
• Use DNS SRV: Yes
• DNS SRV Auto Prefix: Yes

Ensuite...